Model replacement Trimble Connect
The following article describes how models & documents can be exchanged with Trimble Connect.
Models and documents stored in buildagil can be synchronized with Trimble Connect using the "Trimble Connect Sync" program.
To exchange files with Trimble, the desired project must be synchronized with OneDrive. Further information can be found in the following article: Synchronization OneDrive
The "Trimble Connect Sync" program can be downloaded from the following link: Download Trimble Connect Sync
To synchronize with Trimble, start Trimble Connect Sync and open the synchronization settings under Advanced.
New synchronization rules can then be defined via Add Sync Shedule.
Synchronization settings:
Title for the synchronization rule
Direction of synchronization: It is recommended to select "Upload Only" to always transfer the new data from buildagil to Trimble.
Regularity of synchronization: Specify how often the synchronization should be executed. With regular synchronization, the system checks whether new models or new model versions are available, which are then synchronized. Please note that the device on which the synchronization rule is executed must be switched on at the specified time, otherwise the synchronization cannot be executed.
Select the folder for synchronization in OneDrive.
Synchronization is now set up and is executed regularly at the set time.
To perform an initial synchronization manually, click on Sync.
Exchange models, Synchronize models buildagil Trimble,
Set up model exchange
Models and documents stored in buildagil can be synchronized with Trimble Connect using the "Trimble Connect Sync" program.
To exchange files with Trimble, the desired project must be synchronized with OneDrive. Further information can be found in the following article: Synchronization OneDrive
The "Trimble Connect Sync" program can be downloaded from the following link: Download Trimble Connect Sync
To synchronize with Trimble, start Trimble Connect Sync and open the synchronization settings under Advanced.
New synchronization rules can then be defined via Add Sync Shedule.
Synchronization settings:
Title for the synchronization rule
Direction of synchronization: It is recommended to select "Upload Only" to always transfer the new data from buildagil to Trimble.
Regularity of synchronization: Specify how often the synchronization should be executed. With regular synchronization, the system checks whether new models or new model versions are available, which are then synchronized. Please note that the device on which the synchronization rule is executed must be switched on at the specified time, otherwise the synchronization cannot be executed.
Select the folder for synchronization in OneDrive.
Synchronization is now set up and is executed regularly at the set time.
To perform an initial synchronization manually, click on Sync.
Exchange models, Synchronize models buildagil Trimble,
Updated on: 15/11/2024